Stock Offers



General DescriptionSelf Adhesive Material
Material DetailsFasclear Plus S7000 PET23
39,000m2 in rolls 304mm x 1000/2000lm
&
PE85 Top White S692N PET23
18,000m2 in rolls 304mm x 1000/2000lm
LocationSpain

View as PDF (Printable)
Trade NameFasson
Material ListNot Available/Not applicable
Quantity57,000 m2
Source of MaterialLabel Printer
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialCan be Arranged
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Factory
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionPVC (Vinyl) and other Viscom Products
Material Details350 Sheets - 700mm x 1000mm
Avery Graphics, 420 Matt White, Perm, Plain
LocationUK

View as PDF (Printable)
Trade Name
Material ListNot Available/Not applicable
Quantity350 Sheets
Source of MaterialLabel Printer
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyGBP Best reasonable offer
Selling Price UnitsThe Lot
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details***Special Price***
111,600m2 Mixed self-adhesive material
2Q - defects listed
Not available on pick and choose - full list must be taken
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity111,600 m2
Source of MaterialManufacturer
Reason for SaleB Grade -No Faults/With Faults Indicated
ConditionGood
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD .140
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details171,000m2 Mixed self-adhesive material
2Q - defects listed
Pick and Choose available
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity171000 m2
Source of MaterialManufacturer
Reason for SaleB Grade -No Faults/With Faults Indicated
ConditionGood
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD .170
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details152,751m2 Mixed Self-Adhesive Material
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity152,751 m2
Source of MaterialManufacturer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD 0.240
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material DetailsA Grade
PP Gloss Clear TC / Removable / WG62
100,448m2
6x180x2000
6x330x2000
1x1500x525
1x1500x4000
1x1500x4360
12x1500x4500
LocationEurope

View as PDF (Printable)
Trade Name
Material ListSee Details Above
Quantity100,448 m2
Source of MaterialReseller
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionBacking (Release) Material
Material Details88gsm SCK Bleached
50 x 1221 x 8700lm
531,135m2
LocationUK

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity531,135 m2
Source of MaterialManufacturer
Reason for SaleSurplus
A Grade Offcuts
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAs attached PDF
Selling Price CurrencyGBP .115
Selling Price Unitsm2
Selling Price TermsEx Factory
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionPaper, Cardboard, Metallised Film and Other
Material Details43,200m2 OPP Treofan Decor - Eth 57
400mm wide
Applications -
Spot-patch, self-adhesive and cut & stack wraparound labels
LocationEurope

View as PDF (Printable)
Trade Name
Material ListNot Available/Not applicable
Quantity43,200 m2
Source of MaterialLabel Printer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionBacking (Release) Material
Material Details40gsm Bleached Liner
Silicone coated one side
42 tonnes (able to pick and choose to fill 1x40ft container)
LocationUSA

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity42 Tonnes
Source of MaterialReseller
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
Photographs1 Photograph Available 282.jpg [View]
Material SpecificationAvailable on Request
Selling Price CurrencyUSD 680
Selling Price UnitsTonne
Selling Price TermsFOB
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details4647m2 - PP Gloss White TC RP77 HD70
1962m2 - PP Silver Tc AP901 Perm PET23
2864m2 - PP Silver Tc 50 RP74 PET30
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity9473 m2
Source of MaterialManufacturer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsRegret Not Available
Material SpecificationAvailable on Request
Selling Price CurrencyGBP Best reasonable offer will be
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material DetailsFasclear Plus S7000 PET23
39,000m2 in rolls 304mm x 1000/2000lm
&
PE85 Top White S692N PET23
18,000m2 in rolls 304mm x 1000/2000lm
LocationSpain

View as PDF (Printable)
Trade NameFasson
Material ListNot Available/Not applicable
Quantity57,000 m2
Source of MaterialLabel Printer
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialCan be Arranged
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Factory
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionPVC (Vinyl) and other Viscom Products
Material Details350 Sheets - 700mm x 1000mm
Avery Graphics, 420 Matt White, Perm, Plain
LocationUK

View as PDF (Printable)
Trade Name
Material ListNot Available/Not applicable
Quantity350 Sheets
Source of MaterialLabel Printer
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyGBP Best reasonable offer
Selling Price UnitsThe Lot
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details***Special Price***
111,600m2 Mixed self-adhesive material
2Q - defects listed
Not available on pick and choose - full list must be taken
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity111,600 m2
Source of MaterialManufacturer
Reason for SaleB Grade -No Faults/With Faults Indicated
ConditionGood
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD .140
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details171,000m2 Mixed self-adhesive material
2Q - defects listed
Pick and Choose available
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity171000 m2
Source of MaterialManufacturer
Reason for SaleB Grade -No Faults/With Faults Indicated
ConditionGood
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD .170
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details152,751m2 Mixed Self-Adhesive Material
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity152,751 m2
Source of MaterialManufacturer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyUSD 0.240
Selling Price Unitsm2
Selling Price TermsCIF
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material DetailsA Grade
PP Gloss Clear TC / Removable / WG62
100,448m2
6x180x2000
6x330x2000
1x1500x525
1x1500x4000
1x1500x4360
12x1500x4500
LocationEurope

View as PDF (Printable)
Trade Name
Material ListSee Details Above
Quantity100,448 m2
Source of MaterialReseller
Reason for SaleCancelled Order
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionBacking (Release) Material
Material Details88gsm SCK Bleached
50 x 1221 x 8700lm
531,135m2
LocationUK

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity531,135 m2
Source of MaterialManufacturer
Reason for SaleSurplus
A Grade Offcuts
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
PhotographsCan be Obtained
Material SpecificationAs attached PDF
Selling Price CurrencyGBP .115
Selling Price Unitsm2
Selling Price TermsEx Factory
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionPaper, Cardboard, Metallised Film and Other
Material Details43,200m2 OPP Treofan Decor - Eth 57
400mm wide
Applications -
Spot-patch, self-adhesive and cut & stack wraparound labels
LocationEurope

View as PDF (Printable)
Trade Name
Material ListNot Available/Not applicable
Quantity43,200 m2
Source of MaterialLabel Printer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsCan be Obtained
Material SpecificationAvailable on Request
Selling Price CurrencyEUR Best reasonable offer
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionBacking (Release) Material
Material Details40gsm Bleached Liner
Silicone coated one side
42 tonnes (able to pick and choose to fill 1x40ft container)
LocationUSA

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity42 Tonnes
Source of MaterialReseller
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesCan be Obtained
Photographs1 Photograph Available 282.jpg [View]
Material SpecificationAvailable on Request
Selling Price CurrencyUSD 680
Selling Price UnitsTonne
Selling Price TermsFOB
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



General DescriptionSelf Adhesive Material
Material Details4647m2 - PP Gloss White TC RP77 HD70
1962m2 - PP Silver Tc AP901 Perm PET23
2864m2 - PP Silver Tc 50 RP74 PET30
Location

View as PDF (Printable)
Trade Name
Material List View Full Material List as PDF [View]
Quantity9473 m2
Source of MaterialManufacturer
Reason for SaleSurplus
ConditionVery Good
Visit to View MaterialRegret not Possible
SamplesRegret Not Available
PhotographsRegret Not Available
Material SpecificationAvailable on Request
Selling Price CurrencyGBP Best reasonable offer will be
Selling Price Unitsm2
Selling Price TermsEx Warehouse
ShippingWe can, if required, arrange collection, transport and shipping to your port of destination.
This service would include provision of all shipping / customs documentation
InvoicingAny invoicing will be priced on unit price quoted.
NB If price is offered in m2 we can give an indication of per tonne price but not for invoicing.
Payment TermsOur normal payment terms are Bank Transfer against Proforma Invoice.
Other terms can, if necessary, be discussed.
Make Enquiry



SummaryMark Andy P5 17" 10 colour UV servo press
LocationUSA

View as PDF (Printable)
Details1 x Dual framed unwind with 40” capacity, closed loop tension control
, electronic web guide and roll lift
1 x Ultrasonic sensor upgrade for web guide (includes 2 x sensors)
1 x Corotec single sided corona treater for film and foil
1 x Teknek double sided corona treater
10 x Flexo print stations with independent servo driven
plate tooling and doctor blades and GEW UV drying
6 x Tresu enclosed chamber doctor blades, manual
6 x Tresu chamber uncoated drip pans
6 x Keko non-stick coating for Tresu drip pans
1 x Tresu enclosed chamber starter kit
1 x Rail system over the 10 print stations
1 x Moveable rail mounted turn bar
1 x Moveable combination constant tension laminator
with 24” capacity and includes moveable nip roll assembly and idler rollers
1 x Cold foil unit, rail mounted, with unwind and rewind facility,
and includes moveable nip roll assembly and idler rollers
1 x Conventional servo driven die station
1 x Combination constant tension laminator
with 24” capacity and ironing roll
1 x Moveable nip roller assembly which mounts onto the impression
cylinder for wet lamination and cold foil, includes 50 and 90 durometer rolls
1 x Die loading hoist with a maximum of 300 pound capacity
1 x RD score unit
1 x Quick change die station includes hydraulic
die pressure, die throw off and auto registration
1 x Quick change die station cart
1 x Waste matrix tower with 32” capacity
1 x Web break detector
1 x QCDC Registration Camera
1 x Advanced touch screen operator interface
with auto register, job save and recall facility
1 x Transducer for closed loop exit pacing
12 x Auto register locations (1 per print station,
1 per conventional die station, 1 per quick change die station
and 1 per sheeting station (if required)
10 x Pre-register for print stations
1 x Insetting/Constant Error Correction capability
1 x Tidland shear knife unit with 3 knives
1 x Ultrasonic web break detector
1 x Dual framed rewind with 40” capacity,
roll lift and taper tension control
Machine in excellent condition
PRINT CYLINDERS FOR P5 17” REF: BM00185
AMOUNT GEAR
10 81T
9 89T
10 92T
8 93T
9 96T
8 98T
12 99T
18 100T
12 105T
16 108T
12 111T
9 114T
10 116T
13 124T
6 129T
9 130T
12 131T
7 136T
9 138T
9 140T
6 177T
6 201T
MAGNETIC CYLINDERS FOR P5 17” REF: BM00185
AMOUNT GEAR
1 92T
1 96T
1 99T
1 100T
1 105T
1 108T
1 111T
1 116T
1 120T
1 124T
1 130T
1 131T
1 132T
ANIOX ROLLS FOR P5 17” REF: BM00185
AMOUNT SPECIFICATION 60 DEGREE HARPER
2 200 Line 5.5 bcm
1 280 Line 8.0 bc
4 600 Line 4.5 bcm
11 800 Line 3.5 bcm
1
Year of Manufacture2014
Price823,000 GBP
PhotographsAvailable
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryArsoma EM 280-7 Colour UV Flexo Press
LocationEx works Europe

View as PDF (Printable)
Details S/N 280-57 7 colours with UV drying system and with hot air 1 x unwind with roll lift 1 x Web guide with tension adjustment 7 x Printing units (max repeat 18") 3 x Ink pumps 7 x Register adjustment 7 x Hot air dryers 7 x UV lamps GEW type: MD1-HP-30, 6kW 7 x Transport rollers close to UV – air cooled 1 pair of slitting rollers 1 x Turn bar 1 x Lamination unit 1 x Automatic web edge guide BST model EKR 1000 1 x Camera inspection BST Euroscope 1 x Rotary die cutting unit 1 x Label counter 1 x Web cleaning system Additional equipment: 14 x Printing cylinders 2 x Magnetic cylinders 7 x Anilox rollers Dismantling & Loading into container or truck: 2,500 Euros
Year of Manufacture1997
Price130,000 Euros
Photographs6 Photographs Available 492.jpg [View] 493.jpg [View] 494.jpg [View] 495.jpg [View] 496.jpg [View] 497.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryArsoma TR450 Turret Rewinder
LocationEx works Europe

View as PDF (Printable)
DetailsWeb width 450mm
4 rewind shafts
Auto gluing of material to the core
76mm dia. airshafts and can take variable airshafts from 17mm to 15mm
Includes operating system and drive
Year of Manufacture2001
PriceEUR 18,000
Photographs4 Photographs Available 488.jpg [View] 489.jpg [View] 490.jpg [View] 491.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryGallus EM510S - 7 colour press
LocationEx Works Europe

View as PDF (Printable)
Details1000mm unwind
E&L Web Guide
Teknek Web Cleaner
Corona Treater
Vertical path roller system
7 flexo print units installed on platform base
1 independent die station
1 multi die station (including 2 die cutting stations)
1 matrix rewind
Pneumatic impression
6 hot air dryers below print platform
7 UV units, 1 after each print station
Rewind unit
Operating control system on linear track from unwind to product rewind
Full electrical control panel for UV and press
7 x chiller rollers
Refrigeration system for chiller rollers
Tooling
See attached list for print cylinders and anilox rollers
There are no magnetic die cutting cylinders supplied
Year of Manufacture2003
Price195,000 EUR
Photographs5 Photographs Available 483.jpg [View] 484.jpg [View] 485.jpg [View] 486.jpg [View] 487.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttp://youtu.be/spHtzh0VZ6I
See in ProductionCan Be Arranged
Make Enquiry
DetailsMin web width: 3½”
Max web: 10”
Min fold: 7”
Max fold: 14”
Electronic counter with motorised delivery table
Selection of fold gears
Year of Manufacture1998
Price6,500 GBP
Photographs6 Photographs Available 463.jpg [View] 464.jpg [View] 465.jpg [View] 466.jpg [View] 467.jpg [View] 468.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryEdale E250 DG 4 colour Flexo Press
LocationEurope

View as PDF (Printable)
Details3” Pneumatic unwind
4 x Flexo print stations with constant turning anilox rolls and auto throw off
IR drying
Web guide
Splice table
Rotary die cutting
Waste rewind
3” mechanical rewind
Library of print cylinders and gears:-
96T x 4
94T x 2
88T x 3
84T x 3
80T x 3 cylinders and 4 gears
68T x 3
64T x 3
60T x 1
Year of Manufacture1997
Price11,500 GBP
Photographs5 Photographs Available 457.jpg [View] 458.jpg [View] 459.jpg [View] 460.jpg [View] 462.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryGallus EcS340 Servo 8 colour Flexo Press
LocationEx works Europe

View as PDF (Printable)
Details340mrn web width
1000mm maximum reel diameter unwind
E & LWeb guide with splice table
Double sided Kelva Web cleaner
Corona treater
Servo driven in-feed and out-feed
8 servo driven UV flexo printing units (12 ink trays)
Full GEW UV drying system with chill rolls (chiller plant included)
Turn bar with de-lam re-lam for reverse printing
Cold foil stamping
Video lnspection system
Automatic register control
2 x Rotary die cutting units
Matrix waste rewind
Tidland length slitting system with 7 blades
Product rewind
Magnetic cylinders: 2 x Z80, 2 x Z88, 2 x Z92, 2 x Z96, 1 x Z98, 2 x Z104,1 x Z105,
1 x Z112, 1 x Z116, 1 x Z120, 1 x Z128, 1 x Z136, 1 x Z144, 1 x Z152, 1 x Z160.
Printing sleeves: 8 x Z80, 8 x Z88, 8 x Z92, 8 x Z96, I x Z98, 8 x Z104, 8 x Z105,
8 x Z112, 8 x Z116, 8 x Z120, 8 x Z128, 8 x Z136, I x Z144, 8 x Z152, 8 x Z160.
Aniloxroller: 150/30 x 1, 180/8 x 1, 150/8 x 1,250/6.5 x 1,350/6 x 1, 420/3 x 1, 420/2.5 x 1, 50/17 x 1, 160/8.5 x 1,300/7.5 x 1, 250/7 x 1,
280/5.5 x 1, 420/3.5 x 1, 100/10 x 1, 120/9 x 1, 200/7.5 x 1, 350/5 x 1, 420/4 x 1.
To include a selection of consumable parts
Original documentation, including EC certification, parts, electrical circuit
Year of Manufacture2009
Price333,000 EURO
Photographs4 Photographs Available 453.jpg [View] 454.jpg [View] 455.jpg [View] 456.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
VideoClick here to see Photos and Videos of this machin
See in ProductionCan Be Arranged
Make Enquiry



SummaryComco 22", 9 colour press
LocationEx works Europe

View as PDF (Printable)
DetailsMachine Hours : 28600
9 colours (1 reverse printing head)
GEW UV flexo on Chill drums
Turner bar / delam relam for printing on adhesive
Laminating station
Duplex rewind
3 –slot rotary die station
Variprint system for variable repeat lengths
Exit pacing unit with sheeter
Enercon double sided Corona Treater
Martin 40 inch unwind
Accessory base for mounting of video camera
Tecnek web cleaner
22 sets of Print Cylinders of varying sizes
Selection of aniluxes.
Selection of magnetic cylinders.
Chiller
Year of Manufacture2000
Price290,000 GBP
Photographs11 Photographs Available 472.jpg [View] 473.jpg [View] 474.jpg [View] 475.jpg [View] 476.jpg [View] 477.jpg [View] 478.jpg [View] 479.jpg [View] 480.jpg [View] 481.jpg [View] 482.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/TXzzs47YQd8
See in ProductionCan Be Arranged
Make Enquiry



SummaryMark Andy FB254 Flat Bed Die Cutter
LocationUSA

View as PDF (Printable)
DetailsWeb Width: 260mm (10.23”)
Cutting Width: 250mm (9.84”)
Drive: Intermittent Flat Cutting Drive with compensating infeed and outfeed
Operating of system: The Die Cutting system has a quick change
flat die cutting system which allows for the removal
and fixing of new dies quickly. The heavy duty and reliable platen allows
for even cutting all around the platen.
Including electronic operating system and can be connected easily
onto any Mark Andy 10” width web press, and maybe
also be suitable to be integrated
onto other presses, subject to technical inspection.
Dimensions: 1.2m x 1.2m x 1.8m (L x W x H)
Weight: 500kgs
Power: 230V, 16 amps, 3 phase, 50/60hz
Year of Manufacture2001
Price11.000 USD
Photographs6 Photographs Available 447.jpg [View] 448.jpg [View] 449.jpg [View] 450.jpg [View] 451.jpg [View] 452.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry
DetailsSerial no: 4948-0612-188
Web width: 410mm
Unwind max: 2500m
Rewind max: 1000mBR> Power supply :220 – 240 V UK standard (G) plug
Air supply: 8mm ø Inlet (although this can be changed)
Unwind
Web guide
Splice table
1 x Rotary die station
1 x 12” Magnetic cylinder
2 x Die pressure gauges (1 x Rotometrics, 1 x Kocher & Beck)
Waste rewind
1 x Pressure gauge holder
1 x Pressure bridge
Web directional table and unwind sensor
5 continuously rotating web slitting blades
4 back scorer blades
Rewind
Mandrels: 19mm, 25mm, 38mm, 44mm, 76mm.
Instructions and maintenance manuals for the sensors on machine
Comments
All rollers have been assessed and freely move no bearing play, grind or rock.
Unwind sensor has been re-calibrated as of 09/03/2016 and works to the required standard
Web directional table and sensor both work to the required standard
Nip roller condition is very good condition
Web directional table is functioning to the required standard
All machine guards are functioning properly
Machine is in overall very good condition
Year of Manufacture2012
Price15,000 GBP
Photographs3 Photographs Available 469.jpg [View] 470.jpg [View] 471.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryAutocut CM1800 Slitter rewinder
LocationIndia

View as PDF (Printable)
DetailsMATERIAL WIDTH 1800mm
MATERIAL THICKNESS 12 - 120UM OPTIONAL 12-250 UM
UNWIND DIA. 800MM<|BR> UNWIND TYPE. 3 INCH AND 6 INCH SHAFTLESS
REWIND WIDTH 50MM (MIN)
REWIND DIA. 500MM (MAX)
REWIND SHAFT 2.25 INCH & 3 INCH AIR SHAFTS OPTIONAL SLIPPING SHAFTS
SLITTING BLADE RAZOR BLADE OPTIONAL SHEAR BLADE
MECHANICAL SPEED 450M/MIN
WORKING SPEED 400M/MIN
POWER 380V, 3 PHASES 50Hz or specify
MATERIAL SPLICE TABLE
LASER CORE POSITION
MANUAL UNLOADING TREE OPTIONAL AUTOMATIC
CORONA TREATMENT ONE SIDE
12 Month Warranty
This machine is ideal for converting pharmaceutical material,
as well as a wide range of packaging materials
Year of Manufacture2016
PriceEUR 140,000
Photographs2 Photographs Available 441.jpg [View] 442.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryMark Andy P5 13" Flexo Press
LocationEurope

View as PDF (Printable)
DetailsUnwind
1 cantilevered dual unwind with 40” capacity, vertical dancer with closed loop control and electronic web guide
1 servo driven infeed packing with closed loop tension feedback
1 roll lift for cantilevered unwind
1 ultrasonic sensor upgrade for web guide
1 web break detector, ultrasonic
Print stations:
8 print station module with independent servo driven plate tooling
8 standard volume ink pan
8 meter roll with bearings
8 anilox drive disc and bearings
8 Keco non stick coating for ink pan
1 moveable rail track housing included for future installation of rail track
1 moveable turn bar to any print position by moveable mounting frame
Hot Air Drying:
1 high efficiency hot air drying base system including fixed speed blowers,
plenum, power distribution system and ramping heat controls with press seed
8 high efficience hot air dryer tunnel including controls and heating elements per station
8 closed loop temperature control per station
GEW UV Curing:
1 Electrical interface for GEW UV System
1 GEW VCP Cassette (500w/inch - 200w/cm) with cold filter option and E-Brick power supply
1 Power distribution option - up to 8 lamps
1 Upgrade per lamp - CSA compliance
Diecut:
1 2 station diecut with servo driven tooling
1 32” capacity waste windup unit with rider roller
1 Lateral web shifter
1 Laminator with laminating roll, 30” (762mm) dia. capacity
1 Moveable nip roller for increased efficiency of converting
1 Die loading hoist - 136kg capacity
1 Rotometrics RD scorer (cuts the bottom liner to allow for side trim waste
to be rewound on the matrix rewind shaft
1 Web break detector, ultasonic
1 Master control module with press controls
1 Basic touch screen press operator interface
1 Servo exit packing with dynamically adjustable roll diameter
1 Servo drive with 229m/min. mechanical speed and remote diagnostics capability
1 VariPrint capability
1 Load cell for closed loop exit pacing
9 Auto register locations (one required per print station module
one per die cut module and one per sheeting module, if applicable)
8 Pre register - print stations
1 Air circular knife slitter with 3 blades
1 Web break detector, ultrasonic
Inspection:
1 BST Powerscope 4000 vision system with motorised traverse
Mounting and idlers for vision system
Rewind:
1 cantilebered lower rewind with 40” capacity
Options INCLUDED:
1 Delam/Relam unit
2 Idler roll assembly for upward web path
2 Rotometrics Hydra Jack - includes die pressure gauge
1 Lateral side adjust bearing blocks for 1-1/2” journal diameters
2 Die adaptor for Mark Andy tooling - for adapting dies to wider web presses
Notes:
3rd party electrical certification
Rotometrics print cylinder - hardened ground gea
Year of Manufacture2013
Price432,000 EUR
Photographs4 Photographs Available 443.jpg [View] 444.jpg [View] 445.jpg [View] 446.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryMark Andy 2200 10" 6 colour flexo press
LocationEx works Europe

View as PDF (Printable)
DetailsIntegrated roll lifter
BST web guide
6 colours with 1 UV dryer (never used)
2 rotary die cut stations
Lamination with 2 waste wind up shafts
1 flat die cut station
Slitting with 2 pneumatic knives
Mandrels in 76mm (new pneumatics)
Running hours: 23180
2 plate mount cylinders : 82, 84, 96, 128"
Approximately 10 anilox rollers
Machine can be seen in operation
Year of Manufacture1993
PriceEUR 60,000
Photographs5 Photographs Available 436.jpg [View] 437.jpg [View] 438.jpg [View] 439.jpg [View] 440.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryRotoflex VLI 400 Slitter Rewind
LocationEx works UK

View as PDF (Printable)
Details40” Unwind
Web guide
Splice table
Label/length count
Splice detection
Matrix detection
Slitting (razor slitters)
VRP Web Technology Tension Control
Web advance
Product Rewind
Year of Manufacture1999
PriceGBP 20,000
Photographs17 Photographs Available 419.jpg [View] 420.jpg [View] 421.jpg [View] 422.jpg [View] 423.jpg [View] 424.jpg [View] 425.jpg [View] 426.jpg [View] 427.jpg [View] 428.jpg [View] 429.jpg [View] 430.jpg [View] 431.jpg [View] 432.jpg [View] 433.jpg [View] 434.jpg [View] 435.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryABG Vectra Turret Rewinder SGTR 330
LocationEurope

View as PDF (Printable)
DetailsWidth: 330 mm
4 spindle
Glue less system
Printer (CAB) and automatic dispenser for closing the label rolls
with a printed label (this system has to be repaired, not working now)
Spindles 32 mm, 38 mm, 45 mm, 76 mm
Separate unit for length slitting
Year of Manufacture1999
PriceEUR 33,000 dismantling & loadi
PhotographsAvailable
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/TNlwXtjojC8
See in ProductionCan Be Arranged
Make Enquiry



SummaryCCM - 1500 Core Cutting Machine
LocationEx works UK

View as PDF (Printable)
DetailsThe Berkeley CCM-1500 core cutting machine is a useful tool
for any converting operation using cardboard
or plastic cores (subject to testing). The cores can be bought in standard lengths
and cut to variable sizes enabling shorter stock holdings
and more efficient methods of saving on cores.
The parent core (1500mm) is loaded onto the acquired shaft
and a quick setting knife cuts the core, which revolves on the shaft
driven by a motor. Once the motor has stopped,
the cores are then offloaded quickly through a tool-less release
of pre-cut cores. The machine is designed for easy
maintenance and quick change of parts.
Mode: CCM-1500 Maximum Core Length: 1500mm Precision: +(-) 0.1mm Power of Motor: 0.745 kw (1ph) Power Supply: 220V, 3 phase, 60Hz Shaft Adaptor Included: 76mm Extra shaft adaptors can be purchased at additional charge.
Year of Manufacture2016
PriceGBP 2,800
Photographs1 Photograph Available 418.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttp://youtu.be/LdhQ2txQkIA
See in ProductionCan Be Arranged
Make Enquiry



SummaryAutoflex Excel AS - 300 Automatic High Speed Sleeving machine
LocationEx works UK

View as PDF (Printable)
Details Web width: 600mm
Max flat tube width: 280mm
Min flat tube width: 15mm
Production speed of sealing: 350m/min
Precision: +(-) 1mm
1 x Unwind unit with 76mm (3”) or 152mm (6”) pneumatic airshaft
and twin side frames to take maximum unwind diameter of 600mm (23.62”) with infinite control by particle magnetic brake (2.5kg brake) with reel lift.
1 x Automatic tension control system for perfect web control through PLC,
and tension system provided by Techmach model AWG 5000 EPC.
This system has been perfected for control of shrink film substrates,
including other film materials suitable for sleeving
1 x Infeed system to increase mechanical tension on sub standard material
or difficult material with various tolerances across the web width
1 x Web guide system with U-type sensor, using floating shaft
(the shaft moves sideways from the signal from the sensor method
to allow for the material to be guided accurately through the machine)
1 x Process unit as follows:
a) running pneumatic perf station to allow for tear out or for special sleeve products
b) variable guide plate (turns the material into a sleeve)
c) electro pneumatic glue nozzle dispensing head to glue sleeves,
including control unit, which automatically controls the outflow of glue
with the speed of the material being converted on a step-less control system
(continuous adjustment of web speed), which allows the gluing
and sealing heads to be integrated
with an automatic peristaltic glue pump system connected
and integrated with the machine’s PLC
d) process head with rubber and steel impression cylinder,
forming material to a flat output surface for perfect production
of rewound reels, which are required for high speed
sleeving on integrated packaging lines
e) ceramic, dynamically balanced path rollers
for high speed converting
f) variable out feed unit
g) two cantilever out feed rollers to assist winding of product
1 x Unwind unit to unwind reels up to 600mm diameter
on 76mm cantilever shaft with a magnetic clutch sensing brake.
1 x Rewind unit to rewind reels up to 700mm diameter,
with independent rewinding drive including oscillating 76mm (3”)
or 152mm (6”) shaft for perfect rewinding to avoid coning
of the reel at high speeds, using control with a vector frequency drive
and motor manufactured by ABB (1.5kw). Auto air valve is included, to expand or decrease the airshaft.
1 x Operator panel with full operation controls
Total Power: 5kw
Power requirements: AC 380V, 3 phase, 50Hz or specify power of country.
Air supply: 100PSI (0.6Mp)
Weight of Machine: 1200kg
Outer dimensions: 3300x1600x1800mm – (Length x Width x Height)
Suitable for producing shrink sleeves in variable wi
Year of Manufacture2016
Price67,000 Euro
Photographs2 Photographs Available 416.jpg [View] 417.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttp://www.youtube.com/watch?v=PMqix-AX4K8
See in ProductionCan Be Arranged
Make Enquiry



SummaryColordyne 1600 - PC Laser series production class high speed in - line ink jet print system - laser die cutting
LocationUSA

View as PDF (Printable)
DetailsFeatures: · Colordyne PC Chassis Engine, 5 Blade Unit, 1600x1200 dpi
· CDT – Job Control Software with PC
· Flatbed Scanner with Color Calibration
· 160 Feet/Minute Max. Printing Speed
· Dual-Servo Driven Web Control for Critically Precision Web Speed
· Infeed Contact Dust Collection System to Remove Contamination Particles Before Printing Area
· User-friendly Operator Touch Screen Control Panel for Easy Operation
· Accuweb Ultrasonic Web Guide for Precision Lateral Web Control into Print Area
· 24” Max. Diameter Cantilevered Unwind with 3” Diameter Inflatable Spindle
· 28” Long x 14.5” Wide Raised Vacuum Platen
· 24” Max. Diameter Cantilevered Rewind with 3” Diameter Inflatable
Spindle for use when not utilizing Rotary Die Stations
· Infeed and Exit Festoons for Precise Web Tension Throughout Printing Cycle
· 208-240 Volt 3-Phase, 60 Amp with a Neutral Accuweb
Ultrasonic Web Guide for Precision Lateral Web Control into Flexo Printing and Laser Die Station
· 20” Max. Diameter Cantilevered Top-Side Lamination Tower
with 3” Diameter Pneumatically Inflatable Spindle and Nip Roller
· LasX Lasersharp Laser Processing Module, Model LPM400
with Heat Exchanger, 350mm x 350mm Processing Area, and PC-Based
User Interface Software, (2) Separate 208-240 Volt, 3-Phase 60 Amp Services
· 26” Max. Diameter Waste Windup with 3” Diameter Pneumatically Inflatable Spindle
· Adjustable RD Underscore Unit for Precisions Edge Trim
· 26” Max. Diameter Cantilevered Rewind Spindle with 3” Diameter
Inflatable Spindle with 1 HP DC Drive Motor
· Electronic Rewind Tension Control
· Reversible Rewind for either Over or Under Winding
· Inspection Strobe Light with Adjustable Arm
· Flexographic Print/Coating Station with Servo Control,
Hot Air Dryer, Wilson Manufacturing Tint Roller, Doctor Blade.
· GEW UV Curing Unit, 380-480 Volt, 3-Phase 20 Amp
· Wasatch SoftRip Production Class Edition software
· Newly upgraded to the Tigris ink system (as of 7.28.16)
Dismantling & loading USD 4,500
Year of Manufacture
Price325,000 USD
PhotographsAvailable
ConditionVery Good
AvailabilityEx works
Visit to ViewCan be Arranged
Videohttps://youtu.be/lSPkh9e2P5U
See in ProductionCan Be Arranged
Make Enquiry



Summary16" Arpeco Tracker Slitter rewinder
LocationEx works UK

View as PDF (Printable)
DetailsS/N 010-36-95
Standard 76mm unwind with roll lift
Splice clamps
Web guide
Rotary slitting
Web advance
Label/length count
600 Series counter
Strobe
76mm Rewind
Year of Manufacture1995
Price9,500 GBP
Photographs2 Photographs Available 388.jpg [View] 389.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryGM PA- 100 AUTOMATIC CORE CUTTER
LocationUK

View as PDF (Printable)
Details1000mm length
Cutting speed: 70 cuts/min
Core dia: Min. 25mm, Max 152mm
Wall thickness: 10-15mm
List of parts replaced:-
1 off -85-0020 Pin for Bottom Cutter PA/PN/PNT
1 off PAUH76 Hardened Bottom Knife 76mm/3”
2 off /PAGV Drive Roller (1) Ø66 Rubber PA/PN
1 off -KUG0015 Bearing Bush 2030 20/28x30
1 off -LEJ0006 Bronze Bush 20/25x15
1 off -KUG0012 Ball Bearing 6006-ZZ-30/55x13
1 off -85-0006 Shaft for Adaptor PA100 (Hardened Steel)
1 off New motor
Year of Manufacture
Price6,000 GBP
Photographs4 Photographs Available 384.jpg [View] 385.jpg [View] 386.jpg [View] 387.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/zdS97mwrnFE
See in ProductionCan Be Arranged
Make Enquiry
DetailsMATERIAL WIDTH 1800mm
MATERIAL THICKNESS 12 - 120UM OPTIONAL 12-250 UM
UNWIND DIA. 800MM
UNWIND TYPE. 3 INCH AND 6 INCH SHAFTLESS
REWIND WIDTH 50MM (MIN)
REWIND DIA. 500MM (MAX)
REWIND SHAFT 2.25 INCH & 3 INCH AIR SHAFTS OPTIONAL SLIPPING SHAFTS
SLITTING BLADE RAZOR BLADE OPTIONAL SHEAR BLADE
MECHANICAL SPEED 450M/MIN
WORKING SPEED 400M/MIN
POWER 380V, 3 PHASES 50Hz or specify
MATERIAL SPLICE TABLE
LASER CORE POSITION
MANUAL UNLOADING TREE OPTIONAL AUTOMATIC
CORONA TREATMENT ONE SIDE
Year of ManufactureNEW
Price140,000 EUR
Photographs2 Photographs Available 382.jpg [View] 383.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryGallus R200B 8 colour
LocationEx works Europe

View as PDF (Printable)
Details2 x unwinds with automatic butt splicer for continuous feeding of reels
with accumulating festoon
1 x standard unwind
1 x infeed
1 x web guide
1 x corona treater
8 x print stations
7 x UV dryers
1 x turn bar
1 x flat bed die station
3 x rotary die station
1 x outfeed unit
1 x lamination unit
2 x matrix rewinds
Automatic Gallus continuous product turret rewinder
Automatic register control
Tooling:
6 sets (No’s. 48) print cylinders
6 magnetic die cutting cylinders to match
Year of Manufacture1995
Price48,000GBP
Photographs8 Photographs Available 374.jpg [View] 375.jpg [View] 376.jpg [View] 377.jpg [View] 378.jpg [View] 379.jpg [View] 380.jpg [View] 381.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/rnrWt66q0lg
See in ProductionCan Be Arranged
Make Enquiry



SummaryPrimera CX 1200 colour label digital printing machine + Primera EX1200 Die cutting machine
LocationEx works Europe

View as PDF (Printable)
DetailsPrimera CX1200
Toner based digital printing machine
Primera FX1200 die cutting machine
Laminating and die cutting machine
Year of Manufacture2012
Price40,000 GBP for both
Photographs3 Photographs Available 366.jpg [View] 367.jpg [View] 368.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryGoss Suburban 32 page Newspaper press
LocationEx Europe

View as PDF (Printable)
DetailsThis can be increased to 48 pages, A3 equivalent, if required.
Please also note that the 598mm cut off gives A sizes for book printing,
magazines etc. as well as newspapers.
Plus the double parallel, as well as quarter fold.
Production speed: 15,000-18,000 copies per hour
Year of Manufacture
Price28,000 GBP 4,000 Dismantling/h
Photographs3 Photographs Available 349.jpg [View] 350.jpg [View] 351.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/4OjFk1Mzsps
See in ProductionCan Be Arranged
Make Enquiry



SummaryApollo 330z - 5 colour flexo press
LocationEx works Europe

View as PDF (Printable)
DetailsWeb width: 330mm
Print width: 320mm
1 reel unwind
1 infeed
1 splicing table
1 Kelva web cleaner
5 flexo print stations
5 UV units
5 IR drying unit
1 turnbar
1 outfeed unit and lamination station
3 die cutting stations
1 product rewind station with independent drive and tension system
This machine is in excellent condition and has been fully maintained.
Year of Manufacture2009
Price48,000 GBP
Photographs8 Photographs Available 352.jpg [View] 353.jpg [View] 354.jpg [View] 355.jpg [View] 356.jpg [View] 357.jpg [View] 358.jpg [View] 359.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryMark Andy 2200 17" 10 colour
LocationEUROPE

View as PDF (Printable)
Details17inch width - 10 colour stations - doctor blades
5 die stations
3 lamination stations
Turn bar
Conveyor attachment
2 UV stations @ #9 and10 / single lamps
AETEK 3 over head winch’s - 3 waste wind ups 30in diameter
Push button registration/motorized
Pro Mark HS7367 Vacuum system Air knife slitting system Web guide
Electric/ North American Simplex Roll lift
2 rewind mandrels 30 inch diameter.
Approx. 13,000 hrs.
Ceramic anilox rolls:
360 line x 2
400 line x 2
440 line x 6
500 line x 1
550 line x 3
600 line x 3
700 line x 2
800 line x 8
900 line x 2
1000 line x 1
Plate Rolls:
57 x 8 / 59 x 8 / 60 x 10 / 62 x 8 / 63 x 6
64 x 8 / 65 x 5 / 66 x 8 / 67 x 8 / 68 x 8
68-16inch x 1 / 69 x 8 / 70 x 1 / 72 x 6
/ 73 x 8 / 74 x 5 / 75 x 7 / 76 x 8 / 78 x 13
PLEASE NOTE : dismantling and loading extra cost
Year of Manufacture2002
Price165,000 EUR
Photographs5 Photographs Available 323.jpg [View] 324.jpg [View] 325.jpg [View] 326.jpg [View] 327.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummarySchiavi Easy Slit Slitter Rewinder
LocationEx works Europe

View as PDF (Printable)
DetailsWorking Width Max. 1300mm in production
Types of materials: Plastic, paper, laminates
Working width: max. 1300 mm
Material width: max 1350 mm
Material Thickness: PP, PE: 20- 200 my; Paper&laminates 120 gr/m2
Cutting size: min 50/100 mm
Max Rewind diameter: 1400 mm
Unwinder: diameter coil max 800 mm
: diameter spindles int. 76-152 mm
Rewinder: diameter coil max 500 mm
: diameter spindles int. 70-76 mm
Machine Speed: 350 m/min
Web guide system: BST
Voltage: 380 V – threephase 50 Hz
Machine condition: In production
Year of Manufacture2003
Price48,000 GBP
PhotographsCan Be Obtained
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryTaiyo 250-6 colour letter press + 1 flexo
LocationEUROPE

View as PDF (Printable)
DetailsWeb width: 250mm
1 infeed unit
1 web guide
1 splicing Table
6 letterpress units
1 turn bar
7 UV-Dryers***
1 CI drum
1 Delam/Relam
1 flat die cutting unit
1 lamination unit
1 waste rewind
1 rotary die cutting unit
1 slitting unit
1 flexo unit
1 product rewind unit
1 counter
1 operating panel and electrical panel
***UV info:
4-----------2kw for units
1-----------4kw Bottom lamp
1-----------4kw top,after flexo unit
1------------3.6kw after the last print unit
Tooling:
Magnetic cylinders: 61,64,68,71,80,84,90,100,104 and 113
Print cylinders 6pcs of each x 60,61,62,63,64,65,67,68,
71,73,80,81,84,86,89,90,94,100,104,105.
All the gears related to the respective cylinders are also available.
One set [6 pcs] of print shafts are available
The CID ring gear is new it was installed in January 2016
Year of Manufacture1992
Price35,000 GBP
PhotographsCan Be Obtained
ConditionVery Good
AvailabilityIMMEDIATE
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryGallus T 180B/200 4 Colour
LocationEurope

View as PDF (Printable)
DetailsWeb width: 200mm
Print width: 180mm
1 x Reel unwind stand
1 x Infeed
1 x Electronic re-registration system,
to allow for printing more colours, in register (installed in 2010)
1 x Tension system
1 x Web guide
4 x Letterpress Print Units,
4th print unit was bought in April 2010 from Graficon
4 x UV dryers
1 x Die cutting station
1 x Dual product rewind
No tooling
Year of Manufacture1985
Price43,000 Euro
Photographs5 Photographs Available 307.jpg [View] 308.jpg [View] 309.jpg [View] 310.jpg [View] 311.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryEdale Alpha 250-3 Colour Press
LocationEx works Europe

View as PDF (Printable)
DetailsUnwind
New web guide (still in box)
3 x Flexo print stations
IR drying
3 x Rotary die stations
Rotary & razor slitting; Turn bar
2 x New Edale counters fitted
Rewind
Machine in excellent condition, maintained and regularly serviced
All new bearings fitted along with new chains.
Tinting rollers included:
1 x166mm, 1 x 200mm, 1 x 220mm, 1 x 250mm;
Library of print cylinders & gears included:
Approx. 70-80
Magnetic die cutting cylinders included:
1 x 98T
1 x 102T
Year of Manufacture2001
Price29,000 GBP
Photographs5 Photographs Available 312.jpg [View] 313.jpg [View] 314.jpg [View] 315.jpg [View] 316.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryMartin Turret Rewinder 18"
LocationEx works Europe

View as PDF (Printable)
Details18" wide
2 Spindles
For rewinding reels when they are printing off your press
Year of Manufacture1999
Price33,000 EURO
Photographs7 Photographs Available 289.jpg [View] 290.jpg [View] 291.jpg [View] 292.jpg [View] 293.jpg [View] 294.jpg [View] 295.jpg [View]
ConditionVery Good
AvailabilityEX WORKS
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



Summary13" Arpeco Premier with Rotary die station
LocationUK

View as PDF (Printable)
Details*REBUILT IN 2016*
13” (330mm) Web width
Standard 3” (76mm) unwind
Splice clamps
Web guide
Splicing table with clamps
Rotary die station
Rotary slitting (3 x sets of knives)
Web advance
Label/length count
Labels can be inside or outside wound, in hard or soft rolls.
Standard 1" rewind
Year of Manufacture1998
Price28,000 GBP
Photographs3 Photographs Available 282.jpg [View] 281.jpg [View] 280.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryKopack 250 6 colour Letterpress
LocationEurope

View as PDF (Printable)
DetailsWeb width: 250mm
Print width: 230mm
6 x letterpress
1 x flexo varnish
1 x hot foil
7 x UV Dryers
3 x Die Stations
4 x Web Cleaner
Year of Manufacture1991
Price60,000 EUR 2,500 EUR for disma
Photographs7 Photographs Available 219.jpg [View] 220.jpg [View] 221.jpg [View] 222.jpg [View] 223.jpg [View] 224.jpg [View] 225.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionRegret Not Possible
Make Enquiry



SummaryKOPACK 250-16 COLOUR PRESS - ***REDUCED by 43,000 EURO***
LocationEurope

View as PDF (Printable)
DetailsWeb width: 120-250mm
Die width: standard 230mm
Web guide after unwind reel station
Web guides for coordinating register between CI-6 colour,
stack-3 colour, 2 colour letterpress, 2 colour flexo, 2 colour screen units
Letterpress printing unit x 12
Satellite flexo units x 2
Satellite screen units x 2
Recirculation pump for screen unit x 1
Web Accumulator x 2
GEW E-Brick UV Dryers x 16
IR Dryers x 2
Hot Air Dryer x 1
Die stations x 4 (3 with Gap-Master, 1 for die width 277mm)
Removable anvils 1 with large diameter and 3 with standard diameter
Crane x 1
Several cylinders (letterpress, flexo, magnetic cylinders)
Corona station x 1
Web cleaner x 3 (Teknek)
Dimensions: 13.5m x 2.8, x 3.2m (L x W x H)
Year of Manufacture1998
Price155,000 EURO
Photographs8 Photographs Available 253.jpg [View] 254.jpg [View] 255.jpg [View] 256.jpg [View] 257.jpg [View] 258.jpg [View] 259.jpg [View] 260.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryCMC-JWR/L Polybagger
LocationEx works USA

View as PDF (Printable)
DetailsThe unit was designed to have the ability
to add product heads allowing it to be used to add products
on top of whatever you feed into it,
and then plastic wrap the whole package.
Since the big mag was purchased as a collating machine,
there were no product heads installed on ours.
Instead, the magnapack delivers a stack of products
to the bagger whose sole purpose as it stands is to wrap
the stack of products that came out of the gripper from the magnapack.
Including 2 Stackers CMC model Robot 2J-1.
The unit uses a Nordson glue pot model VersaBlue 8073632.
The unit was installed by Goss as part of a
Distribution Center upgrade in 2006.
Goss arranged the install and commissioning of the machine.
All of the equipment is in excellent condition and
has been used very little over the years.
All manuals and electrical drawings for the units.
The unit comes with 11 rolls of consumable plastic wrap
that will provide wrapping medium for products for quite some time
Stackers: CMC Robot 2J-1 serial # 2675 and CMC Robot 2J-2 serial # 2676
Glue Pot: Nordson, VersaBlue 8073632, Serial # LU06D02964
Year of Manufacture2006
Price18,000 EUR
Photographs5 Photographs Available 239.jpg [View] 240.jpg [View] 241.jpg [View] 242.jpg [View] 243.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryEdale Beta 260-2 colour press
LocationUK

View as PDF (Printable)
Details1 x unwind reel stand
1 x web guide
1 x infeed unit
1 x splicing table
2 x flexo print stations with quick change ink tray, metering & anilox roller
2 x IR dryers above print stations
3 x die stations
1 x matrix label waste rewind
1 x reel rewind stand
1 x complete drive and cabinet
One set of print cylinders and anilox rollers included
Year of Manufacture2001
Price28,000 GBP
Photographs8 Photographs Available 231.jpg [View] 232.jpg [View] 233.jpg [View] 234.jpg [View] 235.jpg [View] 236.jpg [View] 237.jpg [View] 238.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryEDALE BETA 260-8 COLOUR PRESS
Locationuk

View as PDF (Printable)
Details1 x unwind reel stand
1 x web guide
1 x infeed unit
1 x splicing table
8 x Flexo print stations as follows:
a) Print stations 1-6 with enclosed carbon fibre ink chambers with ink pumps
b) Print stations 7 and 8 open ink tray type
8 x overhead IR dryers above print stations
3 x die stations
1 x video monitor
1 x matrix label waste rewind
1 x reel rewind stand
1 x complete drive and cabinet
One set of print cylinders and anilox rollers included
Year of Manufacture2008
Price120,000 GBP
Photographs12 Photographs Available 170.jpg [View] 172.jpg [View] 173.jpg [View] 174.jpg [View] 175.jpg [View] 176.jpg [View] 177.jpg [View] 178.jpg [View] 179.jpg [View] 180.jpg [View] 181.jpg [View] 182.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/KUBSEhr7lto
See in ProductionCan Be Arranged
Make Enquiry



SummaryMark Andy 2200-6 Colour Press
LocationUK

View as PDF (Printable)
DetailsWeb width : 450mm
Print width : 440mm
1 x unwind reel stand with reel lift
1 X web guide
1 x infeed unit
1 x splicing table
6 x flexo print stations
6 X enclosed carbon fibre ink chambers with ink pumps
6 x Hot air dryers
3 x die stations
1 x matrix label waste rewind
1 x turn bar
1 x delam/relam
1 x motorised unwind/rewind suitable for hot foil, positioned over 1st die station
All electrical drives and cabinets
Tooling included : Print cylinders 12x8", 6x12",6x16", 6x24"
Ceramic anilox rollers with different screens x 12
Year of Manufacture2008
Price150,000 GBP
Photographs1 Photograph Available 167.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry
DetailsFor production of continuous packs
Web width: 20" inches
Folds: 10" - 18" inches
Delivery table and drive
Year of Manufacture2008
Price28,000 GBP
Photographs6 Photographs Available 184.jpg [View] 183.jpg [View] 185.jpg [View] 186.jpg [View] 187.jpg [View] 188.jpg [View]
ConditionVery Good
Availability
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry
Details8 Colour Flexo
12,766 Machine hours
Max. web width: 330mm
BST web inspection system
Web guide
QC – Quick change cassette and drawer
Unwind/rewind
8 x UV Units
Cold foil stamping
2 Rotary die cutting stations.
8 x Anilox
14 Magnetic
3 x Inkwells for QC
102 x Print cylinders
Anilox x 8
Magnetic x 14
Inkwells for QC x 3
Z65 x 8,Z68 x 8,Z70 x 8,Z75 x 8,Z78 x 8,Z80 x 8,Z85 x 8
Z87 x 8,Z90 x 8,Z94 x 8,Z96 x 8,Z102 x 8,Z109 x 8
Z187 x TBA
Year of Manufacture2006
Price168,000 EUR
Photographs14 Photographs Available 197.jpg [View] 198.jpg [View] 200.jpg [View] 201.jpg [View] 202.jpg [View] 203.jpg [View] 204.jpg [View] 205.jpg [View] 206.jpg [View] 207.jpg [View] 208.jpg [View] 209.jpg [View] 210.jpg [View] 211.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryLINTEC LPM 300 6 colour varnish Letterpress
LocationEurope

View as PDF (Printable)
DetailsUnwind
6 x Letterpress printing units
6 x UV GEW lamps
1 x Flexo varnishing unit with 1 x UV GEW lamp
1 x semi-rotary die cutting unit
1 x flatbed die unit
Quinn HMI Interface for quick make ready and draw adjustment
Slitter rewind
Year of Manufacture2004
Price96,500 EUR
Photographs4 Photographs Available 215.jpg [View] 216.jpg [View] 217.jpg [View] 218.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummarySLI Sanki 250mm 7 colour press
LocationEx works Europe

View as PDF (Printable)
Details7 Rotary letterpress UV print heads, no flexo
Rotary and flat die cutting
Up graded unwind/rewind tension system
Spare C.I> drum (needs recoating)
18 flat bed gears, 17 sheeting gears, 19 print size cylinders
Print cylinders & gears : Z54x7, 56x7, 58x7
60x7,64x7,66x7,68x7,70x7,72x7
76x8,80x7,82x6,84x7,88x7
90x7,92x7,94x7,96x7,100x7
Flat bed die gears:Z54,56,60,62,64
66,68,70,72,76,80,84,86,88,90,96,100
Sheeting gears z54,60,64,66,68,70,72,74
80,84,86,88,90,92,94,96,100
Please note sheeting bed is removed and not with press
The UV supply is an ORC system and UV lights are readily available
This machine is suitable for labels, printing on film, food and cosmetic products, industrial casings and special products.
The price includes dismantling and loading into your container.
Year of Manufacture1988
Price30,000 EUR
PhotographsAvailable
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryKopack 250 super - 6 colour
LocationAustralia

View as PDF (Printable)
Details6 colour
full interdeck UV
flat bed and rotary die cutting
foil attachment
1000mm unwind
CI impression cylinder for printing label and
film products (supported and unsupported film
Softel corona treater
de-lamination
BST web guide
Linotronic 530 film setter included,
to allow you to produce negative and positive film
Tooling:
Rotary die Cylinders: 78, 80, 88, 98, 96, 72 T
1 spare Die Cutting Anvil Cylinder
Print Cylinders :98 T (5 units),88 T (6 units),
96 T (6 units), 80 T (6 units),78 T (2 units),
72 T (1 units),100 T (6 units)
9 spare print mounting shafts
Year of Manufacture1994
Price59,000 EUR
Photographs5 Photographs Available 244.jpg [View] 245.jpg [View] 246.jpg [View] 247.jpg [View] 248.jpg [View]
ConditionVery Good
AvailabilityImmediate
Visit to ViewCan be Arranged
Video
See in ProductionCan Be Arranged
Make Enquiry



SummaryNEW Apollo 530Z -10 Colour
LocationUK

View as PDF (Printable)
DetailsWeb width: 530mm Print width: 520mm Installed and in Yaxley, UK See full specification below
Full Specification View Specification as PDF [View]
Year of ManufactureNew
Price120,000 GBP
PhotographsCan Be Obtained
ConditionVery Good
Availabilityimmediate
Visit to ViewRegret not Possible
Videohttps://youtu.be/OIiAgqEltJs
See in ProductionCan Be Arranged
Make Enquiry



SummaryGOSS Suburban 32 page Newspaper press
LocationEurope

View as PDF (Printable)
DetailsThis can be increased to 48 pages, A3 equivalent, if required
Production speed: 15,000-18,000 copies per hour
Please also note that the 598mm cut off gives A sizes for book printing,
magazines etc. as well as newspapers.
Plus the double parallel, as well as quarter fold.
Year of Manufacture
Price48,000 EUR
Photographs3 Photographs Available 212.jpg [View] 213.jpg [View] 214.jpg [View]
ConditionVery Good
Availabilityimmediate
Visit to ViewCan be Arranged
Videohttps://youtu.be/4OjFk1Mzsps
See in ProductionCan Be Arranged
Make Enquiry
DetailsArcotec corona
Kelva Webcleaner
8 letterpress printing stations
hotfoil
flat die
rotary die
Tecscan camera

Tooling included:
Flat die : 6 off: Z=72, 80, 91, 93, 96, 114
Rotary die : 4 magnetic cylinder : Z= 96, 128, 136, 144

Print Cylinders:
Z72 : 5, Z77 : 4, Z80 : 6, Z86 : 6, Z88 : 5
Z91 : 6, Z93 : 6, Z96 : 8, Z104 : 4, Z112 : 10, Z120 : 9
Z128 : 10, Z130 : 4, Z132 : 8, Z136 : 3, Z144 : 5

N.B: This press has already been dismantled
Packing & loading: EUR 2,500

Year of Manufacture1995
PriceEuro 95,000 Ex-Works
Photographs5 Photographs Available 135.jpg [View] 136.jpg [View] 137.jpg [View] 138.jpg [View] 296.jpg [View]
ConditionVery Good
AvailabilityImmediately
Visit to ViewRegret not Possible
VideoRegret Not Available
See in ProductionRegret Not Possible
Make Enquiry